3 Easy Plant Stand Ideas You Can Build in Under an Hour

 

In todays WoodStory we are building Plant Stands, and I am going to show you 3 different methods and 3 different designs using either a table saw, a bandsaw or a CNC so regardless of what tools are in your shop there is going to be a method you can use. And best of all, these can all be made in one hour or less! So go grab your tools and let’s start this WoodStory. 

📧 Send me a photo of your creation: info@standishwoodstory.com

⌚ TIMESTAMPS

00:00 Intro

00:20 Project #1 - Simple Plant Stand Table Saw Version

01:30 Materials required

02:00 Rabbet Joint making

07:30 Setting the table saw

08:53 Tip for making the stands faster

09:19 Chiseling the grooves

09:45 Project #2 - The Arch Plant Stand Bandsaw version

10:26 Templates

11:24 Band-saw cutting

11:45 What NOT to do

12:20 Tip for making this version faster

13:20 Final touches

15:45 Recap

16:29 Project #3 - The Puzzle Plant Stand CNC version

18:30 Tips for selling

20:00 Carbide Create CNC setup

24:42 Cutting the pieces on the Shapeoko 5 Pro

26:00 Gluing the joints

26:30 Final Sand and Stain

27:10 REVEAL of the 3 Plant Stands

Affiliate Links: *Clicking on the following will cost you nothing, but I earn a commission from products sold via the links below:

🪚CNC Used: Shapeoko 5 Pro: https://shop.carbide3d.com/STANDISHWO... 

Back to blog

DIY Digital Plans

1 of 4